You have a few options, with varying difficulty and cost;
1. If just the thread on the pedal spindle is stripped, buy a new spindle and
rebuild the pedal.
2. If the thread in the crank is stripped, which is more likely - either buy a
new crank, or take the crank to a good bike shop. They can drill it out
oversize, ream it and re-tap it to take a threaded insert which fits the
original pedal threads. This can get expensive, and you may find it cheaper to
buy a new crank.
---- Chris
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Chris C. Broome ARCO Products Company
pwtccb@is.arco.com 1055 West 7th St
Tel: 213-486-0453 Fax: 213-486-8301 Los Angeles, California 90017
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -